Top > Applications > Scraping thin sections of material from a surface
Scraping thin sections of material from a surface

Application Image

 

Application movies

  • ■Possible to cut 10μm height apophysis
  • ・Sapmle：Protrusions on film
  • ・Tool：Ruby Knife and Tungsten probe
  • ・Application：Removing foreign substance from below surface

  • ■Possible to control to scrape surface by each１μm
  • ・Sapmle：Polarizing Film
  • ・Tool：Ruby Knife
  • ・Application：Digging out foreign substance

  • ■Axis Pro automatic scrape function possible to scrape the designated area by semi-automatic control.
  • ・Sapmle：Welded resin part
  • ・Tool：Milling Pro
  • ・Application：Scraping the welded area (100μm width × 50μm depth × 10mm length) and collected the scraped dust.

  • ■Axis Pro automatic scrape function possible to scrape the designated area by semi-automatic control.
  • ・Sapmle：Rubber products
  • ・Tool：Milling Pro
  • ・Application：Surface scrape by μm step.

  • ■Axis Pro automatic scrape function possible to scrape the designated area by semi-automatic control.
  • ・Sapmle：Glass
  • ・Tool：Milling Pro
  • ・Application：Scraping and marking by μm step.

  • ■Axis Pro automatic scrape function possible to scrape the designated area by semi-automatic control.
  • ・Sapmle：Metal parts(Aluminum A5052 Anodized,copper plate)
  • ・Tool：Milling Pro
  • ・Application：Scraping and marking by μm step.

  • ■Axis Pro automatic scrape function possible to scrape the designated area by semi-automatic control.
  • ・Sapmle：Resin film sheet
  • ・Tool：Milling Pro
  • ・Application：Surface scrape by μm step.


  • ■Available to pick up only foreign substance without damaging base material.
  • ・Sample：Terminal of printed board
  • ・Tool：Micro Peeler
  • ・Application：Picking up foreign particle from the surface of the electric pad

  • ■Available to expose the target point for pinpoint sampling.
  • ・Sample：Film
  • ・Tool：Ruby Knife
  • ・Application：Scraping surface for expose the sample to the top

  • ■Available to expose the foreign particle inside the hard resin material such as PMMA.
  • ・Sapmle：PMMA
  • ・Tool：Ruby Knife
  • ・Application：Scraping surface of the resin material.

  • ■ Axis Pro applicable for deburr without making any damage on the base material.
  • ・Sample：End terminal of printed board
  • ・Tool：Micro Peeler
  • ・Application：A few micro level deburr

  • ■Available to scrape micro wire precisely.
  • ・Sapmle：Printed board wire
  • ・Tool：Milling Pro
  • ・Application：Exposure of wire by scraping surface